Just for the Aussies here........specially the ones who are waiting for their clips
http://au.element14.com/3m/923650-08/te ... s/6813032/
Pretty sure with some care and some pointy pliers you can snap the 10 way connectors into 2 way versions:
Now all you need is some patience, soldering equipment, a couple of lengths of small heatshrink and you have an Aussie sourced clip and cable hopefully quicker than the international post gets it here.
And yes, I will repost the hex dumps from the Single and Dual Zone HCM's (they are on my laptop), although I wasnt sure whether these should have been read at 16 bit or 8 bit (I used 16 bit in the files). I used a QL-2006 EEPROM programmer
Luckily I had both genders of HCM available, I didnt actually need to push a hex file back to my Single zone HCM, as I just used my already configured Dual Zone so anyone trying these dump files, be aware that this part is as yet untested so please back up your eeprom to a file first before flashing your HCM just in case, then post your results back for here folks to share.
Cheers