Welcome Anonymous !

Everything you need to modify your ride

Interior Modifications

IQ DVD/RSE pinout help

Specific interior modification information for Holden Commodore VE and VEII Series Commodores, and HSV E1, E2, and E3 models

Postby vaughan14 » Mon Oct 22, 2018 2:52 pm

Hey guys, I recently had VIM activated and wanted to install a Wii in my glove box.

I have a reverse camera so I spliced into that plug and connected a Composite av plug, which worked perfectly.

I then found the pinout for DVD audio on the X4 connector:
Right + : pin 10
Left + : pin 5
gnd - : pin 6

As I didnt have wires in those locations I found the terminal pins on rs-online (stock number: 681-2783)
I ordered x10 for 11 aud, and they arrived in a few days.

I connected the red and white av plugs to the terminal pins and plugged them into the X4 connector but I am getting no audio.

I have looked at the X3 connector and have see some DVD audio output pins, am I missing something, do i have to connect these to somewhere?

Cheers Vaughan.
Newbie Modder
Posts: 1
Joined: Mon Oct 22, 2018 2:11 pm
Has thanked: 0 time
Been thanked: 0 time

Return to Interior Modifications

  • View new posts
  • View unanswered posts
  • Who is online
  • In total there are 2 users online :: 0 registered, 0 hidden and 2 guests (based on users active over the past 5 minutes)
  • Most users ever online was 1184 on Wed May 15, 2024 10:08 am
  • Users browsing this forum: No registered users and 2 guests