Diagnostic Trouble Code: 0034
Diagnostic Trouble Code Name: Pass. Deployment Loop Short to Gnd. Current
Vehicle Make: Holden
Vehicle Model: Commodore (VZ)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Accelerator Pedal Position Sensor 2 Circuit High Voltage
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC P2122, P2123, P2127, P2128, or P2138 for the 2.8L, 3.0L, 3.2L, or 3.6L engine
Circuit / System Description
The accelerator pedal assembly contains 2 accelerator pedal position (APP) sensors. The APP sensors are mounted to the accelerator pedal assembly and are not serviceable. The APP sensors provide a signal voltage that changes relative to pedal position. The engine control module (ECM) supplies each APP sensor with a 5-volt reference circuit, a low reference circuit, and a signal circuit.
Both the APP sensors 1 and 2 signal percentages increase as the pedal is depressed, from approximately 0?percent at rest to above 95?percent when fully depressed.
|