|
Diagnostic Trouble Code: B0084
Diagnostic Trouble Code Name: Front End Sensor 2
Vehicle Make: Holden
Vehicle Model: Commodore (VE)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Accelerator Pedal Position (APP) Sensor 1 Circuit Low Voltage
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTCP2122
Circuit / System Description
The accelerator pedal assembly contains 2?accelerator pedal position (APP) sensors. The APP sensors are mounted in the pedal assembly and are not serviceable. The APP sensors provide a signal voltage that changes relative to the position of the accelerator pedal. The engine control module (ECM) supplies a separate 5-volt reference and low reference circuit for each of the APP sensors.
The APP sensor?1 signal voltage increases as the pedal is depressed, from approximately 1?volt at rest to above 2.5?volts when fully depressed. The APP sensor?2 signal voltage decreases as the pedal is depressed, from approximately 4?volts at rest to less than 1?volt with the accelerator pedal fully depressed.
If the ECM detects that the APP sensor?1 signal voltage is too low, this DTC sets.
|
