|
Diagnostic Trouble Code: P0113
Diagnostic Trouble Code Name: Intake air temperature signal (T- MAP I6, IAT V8) circuit high input.
Vehicle Make: Ford
Vehicle Model: Falcon (AU)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Exhaust Camshaft Position Sensor Range/Performance Bank 2
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC P0341, P0342, P0343, P0346, P0347, P0348, P0366, P0367, P0368, P0391, P0392, or P0393 for the 2.8L, 3.0L, 3.2L, or 3.6L engine
Circuit / System Description
ach camshaft is equipped with a camshaft position (CMP) sensor that the engine control module (ECM) monitors. The CMP sensor is a hall effect switch that works in conjunction with a 4X reluctor wheel. The reluctor wheels are mounted to the camshaft position actuators that are mounted to the end of the camshafts. The ECM uses the CMP sensor signals in order to determine the position of the camshafts. The ECM supplies 5 volts to the CMP sensors on the 5-volt reference circuits and supplies a ground on the low reference circuits. The CMP sensors provide a signal to the ECM on the signal circuits. If the ECM detects extra or missing CMP sensor signal transitions or a signal voltage that is greater or less than the predetermined range within a certain number of crankshaft revolutions, one of these DTCs sets.
|
