A place to discuss the technical documents for GM vehicles such as Holden, Chevrolet, Opel, Vauxhall, Buick, Cadilac and Daewoo
Forum rules
To gain access to the Invite Only forum you must be invited by a member of that forum. That member will PM the mods or admins (NOT you) saying that they nominate you for access. THEY will be responsible for your actions. If you don't post and just leech info, you will BOTH be removed. Dont send a PM to the moderators or admins asking for access, you really dont want to see the result. If you submit information, you may simply be invited
by daron » Thu Jul 16, 2015 8:14 pm
what would be good is a place that has bin fins to compare and play with
update put cluster in my car and went for drive did before and after reads now going over the stuff now....may have found more bytes to change than first thought
-
daron
- Starting Ignition
-
- Posts: 24
- Joined: Tue Oct 29, 2013 9:46 pm
- Has thanked: 0 time
- Been thanked: 2 times
by TazzI » Thu Jul 16, 2015 9:50 pm
daron wrote:what would be good is a place that has bin fins to compare and play with
update put cluster in my car and went for drive did before and after reads now going over the stuff now....may have found more bytes to change than first thought
I feel like your kinda enjoying the pain
-
TazzI
- Moderator
-
- Posts: 986
- Images:
2
- Joined: Thu Dec 22, 2011 8:02 pm
- Has thanked: 16 times
- Been thanked: 41 times
by daron » Thu Jul 16, 2015 10:04 pm
well i know some ppl know already what im doing and yes its easy to ask but also fun to work it out
no pain no gain
-
daron
- Starting Ignition
-
- Posts: 24
- Joined: Tue Oct 29, 2013 9:46 pm
- Has thanked: 0 time
- Been thanked: 2 times
by daron » Thu Jul 16, 2015 10:05 pm
but i wouldn't say no to a little help before i go bald
-
daron
- Starting Ignition
-
- Posts: 24
- Joined: Tue Oct 29, 2013 9:46 pm
- Has thanked: 0 time
- Been thanked: 2 times
by daron » Thu Aug 06, 2015 4:57 pm
well that's it its official i give up cluster can go back to mate
-
daron
- Starting Ignition
-
- Posts: 24
- Joined: Tue Oct 29, 2013 9:46 pm
- Has thanked: 0 time
- Been thanked: 2 times
by LangasLS » Thu Aug 06, 2015 10:17 pm
Stick with it. I know for a fact it can be done - just those in the know have kept it very quiet.
-
LangasLS
- Starting Ignition
-
- Posts: 73
- Joined: Fri Jul 18, 2014 9:02 pm
- Location: Adelaide, SA
- Has thanked: 1 time
- Been thanked: 5 times
by daron » Sun Aug 09, 2015 8:04 pm
i cant keep going i got about as far as i can without help and noone wants to give away their secrets im at a standstill without help its over
-
daron
- Starting Ignition
-
- Posts: 24
- Joined: Tue Oct 29, 2013 9:46 pm
- Has thanked: 0 time
- Been thanked: 2 times
by TazzI » Mon Aug 10, 2015 1:54 pm
daron wrote:i cant keep going i got about as far as i can without help and noone wants to give away their secrets im at a standstill without help its over
Like I said before, moving up into the clusters comms is the only way to go with these modern technologies.
Developers are making algorithms and security ALOT harder on instrument clusters to prevent such alterations. One thing they cant protect from, is attacking it through emulation
-
TazzI
- Moderator
-
- Posts: 986
- Images:
2
- Joined: Thu Dec 22, 2011 8:02 pm
- Has thanked: 16 times
- Been thanked: 41 times
by daron » Mon Aug 10, 2015 3:01 pm
i have no idea about emulation
if i had a car to put dash into and drive and then re read it it might work but i dont have the car to suit that cluster:(
-
daron
- Starting Ignition
-
- Posts: 24
- Joined: Tue Oct 29, 2013 9:46 pm
- Has thanked: 0 time
- Been thanked: 2 times
by TazzI » Tue Aug 11, 2015 12:31 pm
Neither did I till I jumped onto the OBD2 bus and started learning about it all and how each module communicates with one another.
Once the basics are understood, it becomes alot easier
-
TazzI
- Moderator
-
- Posts: 986
- Images:
2
- Joined: Thu Dec 22, 2011 8:02 pm
- Has thanked: 16 times
- Been thanked: 41 times
Return to GM Technical Document Discussion