|
Diagnostic Trouble Code: B0053
Diagnostic Trouble Code Name: Deployment Commanded with Loop DTCs Present
Vehicle Make: Holden
Vehicle Model: Commodore (VE)
Diagnostic Code Entered By: ZerOne
Diagnostic Code Entered On: Wed Oct 06, 2010 11:00 pm
|
Please Note: The DTC Information provided has been randomly generated.
To view the correct Diagnostic Code Information, Please Login, or Register.
Diagnostic Trouble Code Description:
Intake Camshaft Position Sensor Circuit Bank 2
Possible Sensor Faults
ECM
Possible Related Diagnostic Trouble Codes
DTC P0340, P0345, P0365, or P0390
Circuit / System Description
The 4X?camshaft position sensor circuits consist of an engine control module (ECM) supplied 5?V reference circuit, low reference circuit, and an output signal circuit. The camshaft position sensor is an internally magnetic biased digital output integrated circuit sensing device. The sensor detects magnetic flux changes of the teeth and slots of a 4-tooth reluctor wheel attached to the camshaft. As each reluctor wheel tooth rotates past the camshaft position sensor, the resulting change in the magnetic field is used by the sensor electronics to produce a digital output pulse. The sensor returns a digital ON/OFF DC voltage pulse of varying frequency, with 4?varying width output pulses per camshaft revolution that represent an image of the camshaft reluctor wheel. The frequency of the camshaft position sensor output depends on the velocity of the camshaft. The ECM decodes the narrow and wide tooth pattern to identify camshaft position. This information is then used to determine the optimum ignition and injection points of the engine. The ECM also uses camshaft position sensor output information to determine the camshaft relative position to the crankshaft, to control camshaft phasing, and for limp-home operation.
|
